How to adjust the temperature of mechanical air conditioning

Operating steps of mechanical thermostat: Start up: open the switch power supply to the ON position, the thermostat starts; Open the switch power to the OFF position, and the thermostat stands by. Original working mode: Open the switch power supply to COOL, and the thermostat is used as electric heater. Open the open switch power supply to the HEAF position, the thermostat is used as the heating method. Temperature original: mechanical thermostat, the application of the rotary temperature of the original, the little red dot against the control panel marked temperature data information can be.

Open the switch power supply to the LOW position; The temperature device was originally used as a low blocking wind speed; Open the switching power supply to the Wed position, the thermostat is used as the medium wind speed; Open the switching power supply to the High position, the thermostat is used as the High wind speed. The operation steps of the LCD thermostat are the switch button, and the function key can randomly select the startup or standby of the system software. M: Mode key and function key can randomly select the control mode of system software, whether it is electric heater or heating system.

The electric heater is to reduce the natural environment temperature, on the contrary is the system of heating. Wind speed key, the function key selects the size of the wind at will, the wind speed can be divided into three categories: low gear, medium and high, each has a different leaf, from more to less successively means high, medium and low. Raw temperature. Can the original temperature level, if you must make warm, then your original temperature should be less than the temperature in the room, the way is heating, on the contrary, higher than the temperature in the room, the way is electric heater.